Contemporary glass canopy above the entrance to a house — glass canopy Luxembourg — Vitralux Bradtke
External glazing · VSG/TVG · Pauli & Sohn · Glassline

Made-to-Measure Glass Canopies & Windbreaks in Luxembourg — 4 Systems

A glass canopy shelters an entrance, lifts a façade and shrugs off the weather. Vitralux designs and installs made-to-measure glass canopies for every situation: houses, apartment blocks, shops, public buildings. Four systems to choose from, from the classic to the most technical.

Glass canopy suspended on stainless steel tie rods above the entrance to a school building — glass canopy Luxembourg — Vitralux Bradtke
No. 1
the largest single-pane glass canopy ever installed in Luxembourg
Flagship project

The largest single-pane glass canopy in Luxembourg

For a school day-care centre in Gasperich, Vitralux installed the largest single-pane glass canopy in Luxembourg: an oversized triple-laminated pane, with certified structural calculations and anchorages designed specifically for this one project.

  • Triple-laminated glass in a single pane — an exceptional large format
  • Dedicated structural calculations for snow and wind loading
  • Anchorages designed and manufactured specifically for this project
  • A one-off in Luxembourg — proof of what the Vitralux workshop can do
Clear glass canopy on wrought iron brackets above a front door — made-to-measure glass canopy Luxembourg — Vitralux Bradtke
VSG
laminated glass with heat-strengthened plies: the glass stays in place even when broken
Made-to-measure glass canopies

Safety first: laminated glass with heat-strengthened plies

Every Vitralux canopy is made from laminated glass with heat-strengthened plies (VSG/TVG). If the glass breaks, it holds together and stays in the frame — a basic rule for any overhead glazing, and the same requirement we apply to our certified laminated glass balustrades.

From a small canopy over a front door to the XXL canopy of a public building, every pane is cut and worked in our Howald workshop, with dedicated structural calculations wherever sizes or loads demand them. Our systems come from two leading manufacturers: Pauli & Sohn and Glassline.

Adjustable stays · Tie rods · Canopy Cloud · Windbreak

Which canopy suits your project?

Four proven systems, from the classic to the most technical — each one matched to a particular façade situation and a particular architectural language.

01

Canopy on adjustable stays

The canopy rests on stainless steel anchors and adjustable stays fixed to the façade. The glass falls away to the front so water always runs off. A robust system, at home in large formats.

  • Water always runs off — no standing water on the glass
  • Manufacturer: Pauli & Sohn
02

Canopy on tie rods

The canopy hangs from stainless steel tie rods anchored in the façade. An elegant solution with a light visual footprint. Less common, available on specific request.

  • A floating effect, and architecturally striking
  • Manufacturer: Pauli & Sohn
03

Canopy Cloud

A self-supporting canopy carried on an ultra-slim profile fixed straight to the façade — a single fixing line, with no visible arms or tie rods. Ideal where the façade leaves little room, for instance a window directly above the door. Installed several times in Howald, in Bonnevoie and in Luxembourg City.

  • Ideal on a tight façade — minimal fixing profile, very discreet result
  • Manufacturer: Pauli & Sohn / Glassline
04

Made-to-measure glass windbreak

A glass windbreak designed and built to measure by Vitralux — stainless steel frame or a Pauli & Sohn model. Shelters terraces, entrances and outdoor spaces from the wind. Every size and every finish is possible.

  • Fully configurable — shape, size, stainless steel or powder-coated finish
  • Manufacturer: Vitralux made to measure / Pauli & Sohn

Pauli & Sohn canopy system catalogue

The full range of glass canopy systems from our leading manufacturer is on www.pauli.de — Vitralux will advise you on the system that suits your façade.

Our glass canopies

Glass canopies installed across Luxembourg

Front doors, apartment blocks and public buildings: canopies hung on tie rods or stainless steel cables, in clear or frosted glass, always made to measure.

VSG/TVG · SentryGlas · Thermal break

The technical detail behind a Vitralux canopy

Standard glassLaminated glass with heat-strengthened plies (VSG/TVG) — mandatory on every canopy. Stays in place if it breaks.
SentryGlas interlayerSGP interlayer used on large formats or heavy loads — 5× stiffer than standard PVB.
Clear glassLow-iron or standard clear glass, depending on the look you want.
Opaque glassGlass with a coloured interlayer or a lacquered back — every colour available.
Glass with lightingLED lighting integrated into the canopy — several systems available.
ManufacturersPauli & Sohn (canopy systems) · Glassline (Canopy Cloud, Fix'n Slide)
Insulated façade (EWI)Fix'n Slide by Glassline or Amo-Therm screws — thermally broken

Solutions for insulated façades (EWI)

External wall insulation makes fixing a canopy far less straightforward. Vitralux works with two thermally broken solutions — with the same care we bring to our glass façades.

Fix'n Slide — Glassline

A thermally broken fixing block set into the façade, compatible with the Canopy Cloud system. The canopy is fixed without creating a cold bridge through the insulation.

Amo-Therm

Special thermally broken screws: fixed straight through the insulation with no cold bridge. The economical option on an EWI façade.

Canopy data sheets

Fixing and suspension systems for Vitralux glass canopies.

Vordach canopy system Fix'n Slide

Pauli & Sohn canopy system catalogue

The full range of glass canopy systems from our leading manufacturer is on www.pauli.de — Vitralux will advise you on the system that suits your façade.

Frequently asked questions

Frequently asked questions about glass canopies

Plain toughened glass breaks into thousands of small pieces that fall straight down. Above an entrance, that risk is unacceptable. Laminated glass with heat-strengthened plies holds together even when broken: the fragments stay bonded to the interlayer and the pane stays in the frame until our team can attend.

Yes. Vitralux has two solutions for exactly this: the Fix'n Slide system by Glassline (a thermally broken fixing block) and Amo-Therm screws (fixed through the insulation). Both allow a canopy to be installed without creating a cold bridge and without compromising the energy performance of the building.

Yes. LED lighting can be integrated into the structure or into the glass itself. Several systems are available — talk to Vitralux and we will advise you on the one that suits your project.

Yes. Every pane is cut and worked in the Vitralux workshop in Howald. Large formats sometimes call for dedicated structural calculations beforehand — as they did on the XXL canopy for the school day-care centre in Gasperich.

Let's talk about your project

Your glass canopy project in Luxembourg — free quotation

Made to measure · 4 systems · Solutions for insulated façades · Structural calculations where required.